Recommended Uses
Envirologic gear Oils are biodegradable, non-bio accumulative, and minimally toxic.
In the event of a spill, the product biodegrades by more than 60% within 28 days, helping to minimise the impact to the environment.
Envirologic gear Oils GO are designed to give maximum protection in marine gear equipment used on vessels and in environmentally sensitive areas.
Description
The Envirologic® GO Series is comprised of readily biodegradable synthetic gear oils, designed for use in a wide variety of marine applications where incidental exposure of oil to the environment is of concern. In addition to being readily biodegradable and non-sheening, these products are formulated to offer advanced antiwear and extreme pressure properties, reliable corrosion and rust protection, and effective system cleanliness characteristics.
Envirologic GO series are formulated to meet demanding FZG wear and extreme pressure test conditions involving temperature, speed, and pressure, while delivering safe and effective performance.
Typical Characteristics
| Envirologic GO 68 | Envirologic GO 100 | Envirologic GO 150 | |
| ISO Viscosity Grade | 68 | 100 | 150 |
| MPID | 219729 | 219730 | 219731 |
| Appearance (Observation) | Clear | Clear | Clear |
| Density, 15kg/L (ASTM D4052) | 0,857 | 0,85 | 0,84 |
| Flash Point, COC, °C (ASTM D92) | 180 | 180 | 180 |
| Foam Tend., | |||
| Seq. I, ml (ASTM D892) | 10 | 10 | 10 |
| Seq. 11, ml (ASTM D892) | 10 | 10 | 10 |
| Seq. 111, ml (ASTM D892) | 10 | 10 | 10 |
| Viscosity, kinematic | |||
| mm²/s@ 40°C (ASTM D445) | 68 | 100 | 150 |
| mm²/s@ 100°c (ASTM D445) | 12 | 18 | 23 |
| Load-Wear Index, kgf (ASTM D2783) | 48,7 | 48,7 | 48,7 |
| Pour Point, °C (ASTM D97) | -42 | -39 | -39 |
| Viscosity Index (ASTM D2270) | 175 | 178 | 175 |
Envirologic® Gear Oil Is Approved For:
Reintjes Gearbox, ISO VG 150
Garlock Thruster & CPP, ISO VG 150
Versitec Thruster, ISO VG 100
Thrustmaster Thruster, ISO VG 100
SKF Stern tube, ISO VG 100, ISO VG 150
Nakashima Thruster, ISO VG 100, ISO VG 150
Kamome Thruster, ISO VG 100, ISO VG 150
Wartsila Japan Stern tube
Lagersmit Stern tube, ISO VG 100, ISO VG 150
Kemel Stern tube, ISO VG 150
Kemel Thuster
Hundested Thruster, ISO VG 100, ISO VG 150
James Walker Thruster, ISO VG 68, ISO VG 100
James Walker Stern tube
Carco Thruster, ISO VG 150
Brunvol Thruster, ISO VG 68
Hwasueng Thruster, ISO VG 68
Kongsberg / Rolls Royce CPP, ISO VG 68
Envirologic® Gear Oil Is Recommended For Use In:
ISO 15925-1 CKC/CKD
CFR40 Part 435B: non sheen
ANSI/AGMA 9005 E02, 250.04/251.02
Cincinatti EP Gear Oils
David Brown S1.53.101
DIN 51517, Part 3
U.S. Steel 224
Performance Benefits
1. Environmentally Acceptable
Meets the requirements of the EPA Vessel General Permit (VGP 2013) for biodegradation, low toxicity, and low bioaccumulation.
2. Zinc-Free
Suited for applications involving yellow metals found in axial piston pumps.
3. Long Oil Life
Good ability of the synthetic base stock to withstand oxidation at high operating temperatures helps deliver maximum service life for the oil relative to vegetable based readily biodegradable products.
4. Low Temperature Pumbability
Specifically developed with high viscosity index to help ensure good fluidity for low operating temperatures.
5. Premium Performance
Ash less formulation helps to provide good protection against wear of hydraulic pumps, as well as rust and corrosion protection, hydrolytic stability, water separability, foam inhibition, and filterability.
Contact – SACson AB
Back To marine Gear Oils |
Back To Marine Lubricants |
Back To start Page |
Safety Data Sheets |
Content in this page relate to Chevron Marine Products Homepage
For more information go to: https://www.chevronmarineproducts.com